We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing MISUMI UM13-45, communicate with FAMAGA, the world's key vendor of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are symbolized in the quality of items and special attention to each orderer. We cherish everyone, who worked with us - hence, our regular customers get the most acceptable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such buyers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Swaziland, Kiribati, Kyrgyzstan, Mongolia, East Timor, United Arab Emirates, Honduras, Malawi, Lebanon, Iraq, Slovakia, Kazakhstan, Singapore, Ecuador, Dominica, Sudan, India, El Salvador, Antigua and Barbuda, Zambia, Bosnia and Herzegovina, Paraguay, Morocco, Tunisia, Poland, Eswatini, Tajikistan, Iran, Austria, Afghanistan, Montenegro, Ghana, Moldova, Uruguay, Armenia, Israel, Seychelles, Namibia, Zimbabwe, Kenya, Malaysia. A well-shaped logistics link and a partnership network cheer us to conduct our goods anywhere in the globe immediately without compromising product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as to stay on the top.
To get some advice or order, phone us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number |
UM16-80 UH16-80 |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
TypeD-L | ||||||||
UM 4- | 5* | 0.4 | 2.2 | 1.75 | 3.4 | {0.35} | 35 | |
10* | 0.5 | 4.9 | 3.5 | 6.8 | {0.7 } | |||
15 | 0.55 | 7.5 | 5.25 | 10.3 | {1.05} | |||
20 | 0.6 | 11.1 | 7 | 13.7 | {1.4 } | |||
25 | 0.6 | 11.1 | 8.75 | 17.2 | {1.75} | |||
30 | 0.65 | 16.3 | 10.5 | 20.6 | {2.1 } | |||
UM 5- | 5* | 0.45 | 2.25 | 1.75 | 3.4 | {0.35} | 35 | |
10* | 0.5 | 3.13 | 3.5 | 6.8 | {0.7 } | |||
15 | 0.65 | 8.45 | 5.25 | 10.3 | {1.05} | |||
20 | 0.65 | 8.45 | 7 | 13.7 | {1.4 } | |||
25 | 0.7 | 11.9 | 8.75 | 17.2 | {1.75} | |||
30 | 0.7 | 11.9 | 10.5 | 20.6 | {2.1 } | |||
35 | 0.75 | 16.5 | 12.25 | 24.0 | {2.45} | |||
40 | 0.8 | 23.2 | 14 | 27.5 | {2.8 } | |||
45 | 0.8 | 23.2 | 15.75 | 30.9 | {3.15} | |||
50 | 0.85 | 31.45 | 17.5 | 34.3 | {3.5 } | |||
UM 6- | 5* | 0.55 | 2.7 | 1.7 | 4.9 | {0.5 } | 35 | |
10 | 0.7 | 5.6 | 3.5 | 10.8 | {1.1 } | |||
15 | 0.75 | 7.4 | 5.2 | 15.7 | {1.6 } | |||
20 | 0.75 | 7.4 | 7 | 20.6 | {2.1 } | |||
25 | 0.85 | 12.8 | 8.7 | 25.5 | {2.6 } | |||
30 | 0.85 | 12.8 | 10.5 | 31.4 | {3.2 } | |||
35 | 0.9 | 16.7 | 12.2 | 36.3 | {3.7 } | |||
40 | 0.9 | 16.8 | 14 | 41.2 | {4.2 } | |||
45 | 1.0 | 27.8 | 15.8 | 46.1 | {4.7 } | |||
50 | 1.0 | 28.0 | 17.5 | 52.0 | {5.3 } | |||
60 | 1.0 | 28.0 | 18 | 53.0 | {5.4 } | 30 | ||
70 | 1.1 | 46.2 | 20 | 58.8 | {6 } | 28 | ||
UM 8- | 10 | 0.85 | 6.4 | 3.5 | 10.8 | {1.1 } | 35 | |
15 | 0.9 | 7.9 | 5.2 | 15.7 | {1.6 } | |||
20 | 0.9 | 7.9 | 7 | 20.6 | {2.1 } | |||
25 | 0.9 | 7.9 | 8.7 | 25.5 | {2.6 } | |||
30 | 1.0 | 12.0 | 10.5 | 31.4 | {3.2 } | |||
35 | 1.0 | 12.0 | 12.2 | 36.3 | {3.7 } | |||
40 | 1.1 | 18.7 | 14 | 41.2 | {4.2 } | |||
45 | 1.1 | 18.7 | 15.8 | 46.1 | {4.7 } | |||
50 | 1.1 | 18.7 | 17.5 | 52.0 | {5.3 } | |||
60 | 1.2 | 28.2 | 21 | 61.8 | {6.3 } | |||
70 | 1.3 | 42.0 | 24.5 | 72.6 | {7.4 } | |||
UM10- | 10 | 0.9 | 5.2 | 3.5 | 10.8 | {1.1} | 35 | |
15 | 1.0 | 7.3 | 5.2 | 15.7 | {1.6} | |||
20 | 1.0 | 7.3 | 7 | 20.6 | {2.1} | |||
25 | 1.1 | 10.5 | 8.7 | 25.5 | {2.6} | |||
30 | 1.1 | 10.5 | 10.5 | 31.4 | {3.2} | |||
35 | 1.2 | 15 | 12.2 | 36.3 | {3.7} | |||
40 | 1.2 | 15 | 14 | 41.2 | {4.2} | |||
45 | 1.3 | 21.8 | 15.8 | 46.1 | {4.7} | |||
50 | 1.3 | 21.8 | 17.5 | 52.0 | {5.3} | |||
60 | 1.4 | 30.8 | 21 | 61.8 | {6.3} | |||
70 | 1.4 | 30.8 | 24.5 | 72.6 | {7.4} | |||
UM13- | 15 | 1.2 | 8.4 | 5.2 | 15.7 | {1.6} | 35 | |
20 | 1.3 | 11.1 | 7 | 20.6 | {2.1} | |||
25 | 1.3 | 11.1 | 8.7 | 25.5 | {2.6} | |||
30 | 1.4 | 15.1 | 10.5 | 31.4 | {3.2} | |||
35 | 1.4 | 15.1 | 12.2 | 36.3 | {3.7} | |||
40 | 1.4 | 15.1 | 14 | 41.2 | {4.2} | |||
45 | 1.4 | 15.1 | 15.8 | 46.1 | {4.7} | |||
50 | 1.4 | 15.1 | 17.5 | 52.0 | {5.3} | |||
60 | 1.6 | 27.2 | 21 | 61.8 | {6.3} | |||
70 | 1.6 | 27.2 | 24.5 | 72.6 | {7.4} | |||
80 | 1.7 | 36.2 | 28 | 82.4 | {8.4} | |||
UM16- | 15 | 1.4 | 9.6 | 5.2 | 15.7 | { 1.6} | 35 | |
20 | 1.5 | 12.4 | 7 | 20.6 | { 2.1} | |||
25 | 1.5 | 12.4 | 8.7 | 25.5 | { 2.6} | |||
30 | 1.5 | 12.4 | 10.5 | 31.4 | { 3.2} | |||
35 | 1.6 | 15.6 | 12.2 | 36.3 | { 3.7} | |||
40 | 1.6 | 15.6 | 14 | 41.2 | { 4.2} | |||
45 | 1.7 | 20.4 | 15.8 | 46.1 | { 4.7} | |||
50 | 1.7 | 20.4 | 17.5 | 52.0 | { 5.3} | |||
60 | 1.8 | 26.1 | 21 | 61.8 | { 6.3} | |||
70 | 1.8 | 26.1 | 24.5 | 72.6 | { 7.4} | |||
80 | 1.8 | 26.1 | 28 | 82.4 | { 8.4} | |||
UM20- | 20 | 1.8 | 11.3 | 7 | 34.3 | { 3.5} | 35 | |
25 | 1.9 | 13.3 | 8.8 | 43.1 | { 4.4} | |||
30 | 1.9 | 13.3 | 10.5 | 52.0 | { 5.3} | |||
35 | 2 | 16 | 12.3 | 59.8 | { 6.1} | |||
40 | 2 | 16 | 14 | 68.6 | { 7 } | |||
45 | 2.2 | 23.7 | 15.8 | 77.5 | { 7.9} | |||
50 | 2.2 | 23.7 | 17.5 | 86.3 | { 8.8} | |||
60 | 2.2 | 23.7 | 21 | 103.0 | {10.5} | |||
70 | 2.4 | 34.8 | 24.5 | 120.6 | {12.3} | |||
80 | 2.4 | 34.8 | 28 | 137.3 | {14 } |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
Type D-L | ||||||||
UH 4- | 5* | 0.45 | 2.7 | 1.5 | 4.4 | { 0.45} | 30 | |
10* | 0.5 | 3.8 | 3 | 8.8 | { 0.9 } | |||
15 | 0.6 | 8.1 | 4.5 | 13.2 | { 1.35} | |||
20 | 0.65 | 11.7 | 6 | 17.6 | { 1.8 } | |||
25 | 0.7 | 16.8 | 7.5 | 22.1 | { 2.25} | |||
30 | 0.7 | 16.8 | 9 | 26.5 | { 2.7 } | |||
UH 5- | 5* | 0.55 | 3.3 | 1.5 | 4.4 | { 0.45} | 30 | |
10 | 0.6 | 4.65 | 3 | 8.8 | { 0.9 } | |||
15 | 0.6 | 4.65 | 4.5 | 13.2 | { 1.35} | |||
20 | 0.75 | 11.81 | 6 | 17.6 | { 1.8 } | |||
25 | 0.75 | 11.81 | 7.5 | 22.1 | { 2.25} | |||
30 | 0.8 | 16 | 9 | 26.5 | { 2.7 } | |||
35 | 0.85 | 21.68 | 10.5 | 30.9 | { 3.15} | |||
40 | 0.85 | 21.68 | 12 | 35.3 | { 3.6 } | |||
45 | 0.9 | 28.8 | 13.5 | 39.7 | { 4.05} | |||
UH 6- | 5* | 0.65 | 3.2 | 1.5 | 8.8 | { 0.9 } | 30 | |
10 | 0.7 | 3.9 | 3 | 17.7 | { 1.8 } | |||
15 | 0.85 | 7.7 | 4.5 | 26.5 | { 2.7 } | |||
20 | 0.9 | 9.7 | 6 | 35.3 | { 3.6 } | |||
25 | 1.0 | 15.5 | 7.5 | 44.1 | { 4.5 } | |||
30 | 1.0 | 15.5 | 9 | 53.0 | { 5.4 } | |||
35 | 1.1 | 24.8 | 9.8 | 57.9 | { 5.9 } | 28 | ||
40 | 1.1 | 24.8 | 10 | 58.8 | { 6 } | 25 | ||
45 | 1.1 | 24.8 | 11.3 | 66.7 | { 6.8 } | |||
50 | 1.2 | 39.0 | 10 | 58.8 | { 6 } | 20 | ||
60 | 1.2 | 39.0 | 14 | 82.4 | { 8.4 } | 23 | ||
70 | 1.2 | 39.0 | 15 | 88.3 | { 9 } | 21 | ||
UH 8- | 10 | 0.9 | 5.3 | 3 | 17.7 | { 1.8 } | 30 | |
15 | 0.9 | 5.3 | 4.5 | 26.5 | { 2.7 } | |||
20 | 1.1 | 11 | 6 | 35.3 | { 3.6 } | |||
25 | 1.1 | 11 | 7.5 | 44.1 | { 4.5 } | |||
30 | 1.2 | 15.9 | 9 | 53.0 | { 5.4 } | |||
35 | 1.2 | 15.9 | 10.5 | 61.8 | { 6.3 } | |||
40 | 1.3 | 23.1 | 12 | 70.6 | { 7.2 } | |||
45 | 1.3 | 23.1 | 13.5 | 79.4 | { 8.1 } | |||
50 | 1.4 | 33.3 | 15 | 88.3 | { 9 } | |||
60 | 1.4 | 33.3 | 18 | 105.9 | {10.8 } | |||
70 | 1.5 | 48.0 | 19 | 111.8 | {11.4 } | 27 | ||
UH 10- | 10 | 1.1 | 6.9 | 3 | 17.7 | { 1.8} | 30 | |
15 | 1.1 | 6.9 | 4.5 | 26.5 | { 2.7} | |||
20 | 1.2 | 9.3 | 6 | 35.3 | { 3.6} | |||
25 | 1.2 | 9.3 | 7.5 | 44.1 | { 4.5} | |||
30 | 1.3 | 12.7 | 9 | 53.0 | { 5.4} | |||
35 | 1.4 | 17.5 | 10.5 | 61.8 | { 6.3} | |||
40 | 1.4 | 17.5 | 12 | 70.6 | { 7.2} | |||
45 | 1.5 | 23.8 | 13.5 | 79.4 | { 8.1} | |||
50 | 1.5 | 23.8 | 15 | 88.3 | { 9 } | |||
60 | 1.6 | 32.4 | 18 | 105.9 | {10.8} | |||
70 | 1.7 | 44.2 | 21 | 123.6 | {12.6} | |||
UH 13- | 15 | 1.5 | 9.2 | 4.5 | 44.1 | { 4.5} | 30 | |
20 | 1.5 | 9.2 | 6 | 58.8 | { 6 } | |||
25 | 1.5 | 9.2 | 7.5 | 73.5 | { 7.5} | |||
30 | 1.8 | 18 | 9 | 88.3 | { 9 } | |||
35 | 1.8 | 18 | 10.5 | 103.0 | {10.5} | |||
40 | 1.8 | 18 | 12 | 117.7 | {12 } | |||
45 | 1.8 | 18 | 13.5 | 132.4 | {13.5} | |||
50 | 2.0 | 28.5 | 15 | 147.0 | {15 } | |||
60 | 2.1 | 36 | 18 | 176.5 | {18 } | |||
70 | 2.2 | 45.1 | 21 | 205.9 | {21 } | |||
80 | 2.2 | 45.1 | 20 | 196.1 | {20 } | 25 |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
Type D-L | ||||||||
UH 16- | 15 | 1.7 | 9.6 | 4.6 | 44.1 | { 4.5} | 30 | |
20 | 1.9 | 14 | 6 | 58.8 | { 6 } | |||
25 | 1.9 | 14 | 7.5 | 73.5 | { 7.5} | |||
30 | 1.9 | 14 | 9 | 88.3 | { 9 } | |||
35 | 1.9 | 14 | 10.5 | 103.0 | {10.5} | |||
40 | 2.2 | 25.1 | 12 | 117.7 | {12 } | |||
45 | 2.2 | 25.1 | 13.5 | 132.4 | {13.5} | |||
50 | 2.2 | 25.1 | 15 | 147.1 | {15 } | |||
60 | 2.3 | 30.5 | 18 | 176.5 | {18 } | |||
70 | 2.5 | 44.7 | 21 | 205.9 | {21 } | |||
80 | 2.5 | 44.7 | 24 | 235.4 | {24 } | |||
UH 20- | 25 | 2.3 | 13.8 | 7.5 | 110.8 | {11.3} | 30 | |
30 | 2.3 | 13.8 | 9 | 132.4 | {13.5} | |||
35 | 2.5 | 18.8 | 10.5 | 154.9 | {15.8} | |||
40 | 2.5 | 18.8 | 12 | 176.5 | {18 } | |||
45 | 2.8 | 29.4 | 13.5 | 199.1 | {20.3} | |||
50 | 2.8 | 29.4 | 15 | 220.6 | {22.5} | |||
60 | 3 | 40.5 | 18 | 264.8 | {27 } | |||
70 | 3 | 40.5 | 21 | 308.9 | {31.5} | |||
80 | 3.2 | 54.4 | 24 | 353.0 | { 36 } |
Type | UV | UY | UR | UF | UL | UTT | UM | UH | UBB | ||||||||||||||||||
D | |||||||||||||||||||||||||||
2 | 0.05{0.005} | 0.2{0.02} | 0.3{0.03} | 0.5{0.05} | |||||||||||||||||||||||
3 | N/mm 0.05 {kgf/mm} {0.005} | N/mm 0.098 {kgf/mm} {0.01} | N/mm 0.29 {kgf/mm} {0.03} | N/mm 0.49 {kgf/mm} {0.05} | N/mm 0.98 {kgf/mm} {0.1} | N/mm 1.5 {kgf/mm} {0.15} | |||||||||||||||||||||
4 | 2.0{0.2} | 2.9{0.3} | 4.9{0.5} | ||||||||||||||||||||||||
5 | |||||||||||||||||||||||||||
6 | N/mm 2.0 {kgf/mm} {0.2} | N/mm 2.9 {kgf/mm} {0.3} | N/mm 5.9 {kgf/mm} {0.6} | N/mm 9.8 {kgf/mm} {1.0} | |||||||||||||||||||||||
8 | |||||||||||||||||||||||||||
10 | N/mm 0.2 {kgf/mm} {0.02} | ||||||||||||||||||||||||||
12 | |||||||||||||||||||||||||||
13 | N/mm 9.8 {kgf/mm} {1.0} | N/mm 19.6 {kgf/mm} {2.0} | |||||||||||||||||||||||||
14 | |||||||||||||||||||||||||||
16 | |||||||||||||||||||||||||||
20 | 0.3{0.03} | 0.5{0.05} | 0.98{0.1} | 2.9{0.3} | 3.9{0.4} | 4.9{0.5} | 14.7{1.5} | 29.4{3.0} | |||||||||||||||||||
Fmax. | F=Lx70% | F=LxFa% | F=LxFa% | F=Lx45% | F=Lx40% | F=LxFa% | F=LxFa% | F=LxFa% | F=L?Fa% |