We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APE062R
Description
[NAAMS] Locating Pin With Cross Hole APE Small Head
Stock availability:
On request
If you are looking for MISUMI APE062R, get in touch with FAMAGA, the world's prime retailer of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of products and personalseparate attention to each consumer. We respect everyone, who conspired with us - thus, our regular buyers bring in the most desirable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Cameroon, Latvia, Bulgaria, Austria, Belarus, Grenada, Poland, Madagascar, United Arab Emirates, Serbia, Eritrea, El Salvador, Iran, Nigeria, Yemen, Monaco, Macedonia, Tonga, Botswana, South Sudan, Chad, Croatia, Comoros, India, Guatemala, Haiti, Ireland, Kenya, Qatar, Vietnam, Finland, Kazakhstan, Russia, Mali, East Timor, Iceland, Nepal, Norway, South Korea, Dominica, The Gambia, Philippines, Zimbabwe, Mexico, Cyprus, Albania, Luxembourg, Costa Rica. A well-developed logistics series and a partnership network cheer us to send our units anywhere in the world promptly without discrediting product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To ask a question or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Head Tip
|
Type | Retractable | Surface Treatment | Material | Hardness | |
APE | NAAMS Standard | R -Front Hole S -Side Hole | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APERS | A Configurable | Front Hole | P -Plain T -TiN | ||
APESS | Side Hole |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | E Flat Callout | A Lead Length Callout | Retractable | |||
APE | 08 | 4 | R |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
APERS | T | A | 08 | - | A42 | |||
APESS | P | C | 08 | - | A42 |
Type | E Flat Callout (Actual) | A Lead Length | Retractable | Coating (Optional) | D Diameter | B Rad | C Rad | |||||||||
10 mm | 15 mm | 25 mm | 35 mm | 45 mm | 55 mm | 65 mm | 75 mm | 85 mm | 95 mm | |||||||
APE (Slot -0.15) | 06 (5.85) | 1 | 2 | 3 | 4 | 5 | 6 | - | - | - | R -Front Hole S -Side Hole | None-Plain T- TiN | 7.09 | 1.0 | 18.0 | |
08 (7.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | - | 8.81 | 1.0 | 24.0 | ||||
10 (9.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 10.63 | 2.0 | 30.0 | |||
13 (12.85) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 13.46 | 2.0 | 39.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | |||||||
APERS (Front Hole) APESS (Side Hole) (Slot-0.15) | P-Plain T- TiN | A B C | 6 (5.85) | 10 ~ 55 | 7.09 | 1.0 | 18.0 | 9.0 | D/2 |
8 (7.85) | 10 ~ 75 | 8.81 | 24.0 | 12.0 | D/2 | ||||
10 (9.85) | 10 ~ 100 | 10.63 | 2.0 | 30.0 | 15.0 | D/2 | |||
13 (12.85) | 13.46 | 39.0 | 19.5 | D/2 |