We are not the manufacturer, authorised distributor or authorised representative of the IFM brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
IFM
Country
Germany
Part number
SI5007
Description
Flow monitor with LED bar graph for indication of switch point and flow
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Application | |||
|---|---|---|---|
| Media | Liquids, Gases | ||
| Measured medium temperature [°C] | -25…80 | ||
| Pressure strength [bar] | 300 | ||
| Liquid media | |||
| Measured medium temperature [°C] | -25… 80 | ||
| Gases | |||
| Measured medium temperature [°C] | -25… 80 | ||
| Electronic data | |||
| Operating voltage [V] | 18…36 DC | ||
| Current consumption [mA] | <60 | ||
| Protection class | III | ||
| Reverse polarity protection | yes | ||
| Power-on delay time [s] | 10 | ||
| Inputs/outputs | |||
| Number of inputs and outputs | Number of digital outputs: 2 | ||
| Outputs | |||
| Total number of outputs | 2 | ||
| Output signal | Switching signal, IO-Link, (configurable ) | ||
| Electrical version | PNP | ||
| Number of digital outputs | 2 | ||
| Output function | normally open / normally closed, (parameterizable) | ||
| Max. voltage drop of switching output DC [V] | 2.5 | ||
| DC load current of switching output DC [mA] | 250 | ||
| Short-circuit protection | yes | ||
| Short-circuit protection type | clocked | ||
| Overcurrent protection | yes | ||
| Measurement/setting range | |||
| Probe length L [mm] | 45 | ||
| Liquids | |||
| Parameter setting within [cm/s] | 3…300 | ||
| Max. sensitivity [cm/s] | 3…100 | ||
| Gases | |||
| Parameter setting within [cm/s] | 200…3000 | ||
| Max. sensitivity [cm/s] | 200…800 | ||
| Temperature control | |||
| Range measurement [°C] | 2…80 | ||
| Resolution [°C] | 1 | ||
| Accuracy/Uncertainty | |||
| Reproducibility [cm/s] | 1…5 | ||
| Repeatability note |
| ||
| Temperature drift [cm/s x 1/K] | 0.1, (for water 5…100 cm/s, 10…70 °C) | ||
| Max. temperature gradient (rate of change of medium temperature) [K/min] | 300 | ||
| Switch point error [cm/s] | ± 2…± 10, (for water 5…100 cm/s , 25 °C, factory setting) | ||
| Hysteresis [cm/s] | 2…5, (for water 5…100 cm/s, 25 °C, Factory setting) | ||
| Temperature control | |||
| Switch point error [K] | ± 3 (v> 5cm/s), (Liquid media) | ||
| Resolution [K] | 1 | ||
| Reproducibility [K] | 2 | ||
| Response time | |||
| Response time [s] | 1…10 | ||
| Liquids | |||
| Response time [s] | 1…10 | ||
| Gases | |||
| Response time [s] | 1…10 | ||
| Temperature control | |||
| Response time [s] | 1…10 | ||
| Software / Programming | |||
| Switch point setting | Programming buttons | ||
| Interfaces | |||
| Communication interface | IO-Link | ||
| Transmission method | COM2 (38.4 kBaud) | ||
| IO-Link test | 1.1 | ||
| SDCI standard | IEC 61131-9 | ||
| IO-Link Device ID | 53 d / 00 00 35 h | ||
| Profiles | Smart Sensor: Process Data Variable , Device Identification | ||
| SIO Mode | yes | ||
| Desired port type | A | ||
| Analog operating data | 2 | ||
| Binary operating data | 2 | ||
| Min. cycle time [ms] | 3 | ||
| Operating conditions | |||
| Ambient temperature [°C] | -25…80 | ||
| Storage temperature [°C] | -25…100 | ||
| C degree of protection | IP 65, IP 67 | ||
| Tests / approvals | |||
| EMC |
| ||
| Impact resistance |
| ||
| Vibration resistance |
| ||
| MTTF [years] | 277 | ||
| Mechanical data | |||
| Weight [g] | 254 | ||
| Dimensions [mm] | M18 x 1.5 | ||
| Designation threads | M18 x 1.5 | ||
| Material | stainless steel steel (1.4404 / 316L), stainless steel steel (1.4310 / 301), PC, PBT-GF20, EPDM/X medium | stainless steel steel (1.4404 / 316L), O-ring: FKM 80 Shore A | |
| Process connection | M18 x 1.5 internal thread | ||
| Displays / Controls | |||
| Display |
| ||
| Notes | |||
| Packing quantity | 1 piece | ||
| Electrical connection | |||
| Connection | Connector: 1 x M12 | ||
