We are not the manufacturer, authorised distributor or authorised representative of the Hengstler brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Hengstler RDM , connect FAMAGA, the world's major retailer of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are depicted in the quality of merchandises and private attention to each customer. We understand everyone, who liased with us - therefore, our regular consumers bring in the most convenient purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Uzbekistan, Sri Lanka, Oman, South Korea, Mozambique, Belize, Libya, Guatemala, Mali, Nepal, The Gambia, Comoros, Brazil, Japan, Mauritius, Malta, China, Ukraine, Guyana, Burkina Faso, Djibouti, Poland, Finland, Serbia, Montenegro, Bolivia, Bosnia and Herzegovina, Kuwait, Seychelles, Botswana, Andorra, Latvia, Tajikistan, Costa Rica, Moldova, Mauritania, Angola, Morocco, Uganda, Malaysia, Albania. A well-built logistics link and a partnership network allow us to dispatch our goods anywhere in the world as soon as possible without disreputing product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Function / Application | Safety relay |
Product line | KACO |
Relay family | RDM |
Contactset | forcibly guided |
According EN 50205 | Application type A |
Ambient temperature [°C] | -15 ... +70 °C |
Soldering heat resistance [°C] | 260 °C |
Max. soldering time [s] | 5 s |
Pins pre-soldered with | Sn 100 |
Approval |
|
Standards |
|
Meets the requirements | RoHS |
Number of NO contacts | 4 ... 8 |
Number of NC contacts | 2 ... 6 |
Number of CO contacts | 0 |
Dimensions L x W x H [mm] | 70,0 x 20,5 x 44,0 mm |
Housing | dustproof (RT II) |
Shock resistance NO / NC [g] | 10/10 g |
Puls duration (half sinus) | 16 ms |
Vibration resistance NO / NC [g] | 5/5 g |
Frequency range [Hz] | 5 - 55 Hz |
Operating time NC contact, contact opens [ms] | 13 ms |
Operating time NO contact, contact closes [ms] | 15 ms |
Releasing time NO contact, contact opens [ms] | 5 ms |
Releasing time NC contact, contact closes [ms] | 7 ms |
Mechanical service life (without load) | 10,000,000 switching cycles |
Connection type | Solder pins for pcb |
Weight [g] | 85 g |
Drive system | DC monostable |
Nominal coil voltage [V] | 6 ... 220 V |
Coil resistance [Ohm] | 30 ... 42,600 Ohm |
Contact material | AgSnO + 2 µm Au |
Max. switching current [A] | 8 A |
Max. switching voltage [V] | 230/240 V |
Max. switching capacity [VA] | 2000 VA |
Switching capacity AC-15 at 230 V [Ie in A] |
|
Switching capacity DC-13 at 24 V [Ie in A] | 1,2 A |
Electrical service life (with nominal load) | 100,000 cycles |
Short-circuit capacity 1000 A / AC 230 V [A] | 8 A |
Insulation | Basic insulation |
Function / Application | Safety relay |
Product line | KACO |
Relay family | RDM |
Contactset | forcibly guided |
According EN 50205 | Application type A |
Ambient temperature [°C] | -15 ... +70 °C |
Soldering heat resistance [°C] | 260 °C |
Max. soldering time [s] | 5 s |
Pins pre-soldered with | Sn 100 |
Approval |
|
Standards |
|
Meets the requirements | RoHS |
Number of NO contacts | 4 ... 8 |
Number of NC contacts | 2 ... 6 |
Number of CO contacts | 0 |
Dimensions L x W x H [mm] | 70,0 x 20,5 x 44,0 mm |
Housing | dustproof (RT II) |
Shock resistance NO / NC [g] | 10/10 g |
Puls duration (half sinus) | 16 ms |
Vibration resistance NO / NC [g] | 5/5 g |
Frequency range [Hz] | 5 - 55 Hz |
Operating time NC contact, contact opens [ms] | 13 ms |
Operating time NO contact, contact closes [ms] | 15 ms |
Releasing time NO contact, contact opens [ms] | 5 ms |
Releasing time NC contact, contact closes [ms] | 7 ms |
Mechanical service life (without load) | 10,000,000 switching cycles |
Connection type | Solder pins for pcb |
Weight [g] | 85 g |
Drive system | DC monostable |
Nominal coil voltage [V] | 6 ... 220 V |
Coil resistance [Ohm] | 30 ... 42,600 Ohm |
Contact material | AgSnO + 2 µm Au |
Max. switching current [A] | 8 A |
Max. switching voltage [V] | 230/240 V |
Max. switching capacity [VA] | 2000 VA |
Switching capacity AC-15 at 230 V [Ie in A] |
|
Switching capacity DC-13 at 24 V [Ie in A] | 1,2 A |
Electrical service life (with nominal load) | 100,000 cycles |
Short-circuit capacity 1000 A / AC 230 V [A] | 8 A |
Insulation | Basic insulation |