We are not the manufacturer, authorised distributor or authorised representative of the Hengstler brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Hengstler tico 773 , contact FAMAGA, the world's the best provider of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of products and individual attention to each buyer. We appreciate everyone, who collaborated with us - therefore, our regular clients get the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Mongolia, Cambodia, Bolivia, Russia, Congo, Papua New Guinea, Mali, Honduras, Costa Rica, Central African Republic, South Sudan, United States, Saudi Arabia, Equatorial Guinea, Estonia, Slovakia, Madagascar, Austria, Netherlands, Latvia, The Bahamas, Morocco, Angola, Swaziland, Jamaica, Mexico, Panama, Burundi, Dominica, Israel, Croatia, Lithuania, Peru, Sudan, Zimbabwe, Benin, China, Serbia, Belarus, Nepal. A advanced logistics chains and a partnership network guide us to conduct our items anywhere in the world on-time without undermining product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Product Family | tico 773 |
Function | Time counter |
Technology | Electronic |
Digits | 6-digit |
Display |
|
Preset | 3 presets |
Interface | USB interface |
Digit Height [mm] |
|
Display Variant |
|
View Angle | 12:00 |
Relay | 1 or 2 relays |
Voltage |
|
Reset |
|
Signal Times | 0.01 s to 599.99 s or bistable, programmable, tolerance + 10 ms, active on/off |
Current Consumption [mA] |
|
Power Consumption | < 5 W?<8 W |
Cable Cross-Section | 1...1.5 mm? (0.0015...0.0023 in?) with multicore cable end |
Input Resistance | approx. 10 kOhm |
Pulse Length min. | 17 ms (30 Hz), 8 µs (60 kHz) |
Supply Voltage |
|
Count Frequency [Hz] |
|
Overload Protection |
|
Overload Protection Relay Output |
|
Sensor Supply |
|
Storage of Values | NVM> 10 years |
Electrical Connection | pluggable screw terminals / connecting clamps |
Amplitude Threshold |
|
Active Edge | programmable, positive with PNP input, negative with NPN input |
Pulse Shape | any square wave (1:1 for max. frequency) |
Prescaler | 0.0001 - 99.9999 |
Set Function | set to VW 0 (independent of resets) |
Display and Preset Range | - 999 999 to + 999 999 |
Alarm Signal |
|
Relay (Preset 1 and 2) |
|
Transistor output (Preset 1 + 2) |
|
Application Output |
|
Counter Mode Input A,B |
|
Preselect Modes |
|
Application Input/Output (Counter) |
|
Mode | batch counter with preset or 2. totalizing counter with preset |
Count Mode |
|
Product Family | tico 773 |
Function | Time counter |
Technology | Electronic |
Digits | 6-digit |
Display |
|
Preset | 3 presets |
Interface | USB interface |
Digit Height [mm] |
|
Display Variant |
|
View Angle | 12:00 |
Relay | 1 or 2 relays |
Voltage |
|
Reset |
|
Signal Times | 0.01 s to 599.99 s or bistable, programmable, tolerance + 10 ms, active on/off |
Current Consumption [mA] |
|
Power Consumption | < 5 W?<8 W |
Cable Cross-Section | 1...1.5 mm? (0.0015...0.0023 in?) with multicore cable end |
Input Resistance | approx. 10 kOhm |
Pulse Length min. | 17 ms (30 Hz), 8 µs (60 kHz) |
Supply Voltage |
|
Count Frequency [Hz] |
|
Overload Protection |
|
Overload Protection Relay Output |
|
Sensor Supply |
|
Storage of Values | NVM> 10 years |
Electrical Connection | pluggable screw terminals / connecting clamps |
Amplitude Threshold |
|
Active Edge | programmable, positive with PNP input, negative with NPN input |
Pulse Shape | any square wave (1:1 for max. frequency) |
Prescaler | 0.0001 - 99.9999 |
Set Function | set to VW 0 (independent of resets) |
Display and Preset Range | - 999 999 to + 999 999 |
Alarm Signal |
|
Relay (Preset 1 and 2) |
|
Transistor output (Preset 1 + 2) |
|
Application Output |
|
Counter Mode Input A,B |
|
Preselect Modes |
|
Application Input/Output (Counter) |
|
Mode | batch counter with preset or 2. totalizing counter with preset |
Count Mode |
|