We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
SOM-4E-0A-C1
Part number
103489
Description
Relais SOM-4E-0A-C1
Stock availability:
On request
If you are inspecting Euchner SOM-4E-0A-C1 103489, communicate with FAMAGA, the world's influential company of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of spare parts and special attention to each purchaser. We cherish everyone, who joined with us - thus, our regular buyers procure the most helpful purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such consumers, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Bhutan, South Africa, France, Gambia, Papua New Guinea, Russia, Andorra, Antigua and Barbuda, Slovenia, Cameroon, Palestine, Liechtenstein, Canada, Rwanda, South Sudan, Ghana, Zambia, Norway, Tonga, Tunisia, Ecuador, Tajikistan, Qatar, Mozambique, Mongolia, Armenia, Paraguay, Eswatini, Slovakia, Estonia, Malta, Suriname, Lithuania, Yemen, Australia, Brazil, Montenegro, Samoa, Argentina, Kuwait, Iceland, Equatorial Guinea. A well-elaborated logistics network and a partnership network cheer us to conduct our goods anywhere in the globe as soon as possible without discrediting product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To get some advice or book, contact us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
PWR | Green, AS-Interface power |
ASi | Red, bus communication |
OUT | Yellow, state of output signal switching device |
ALARM | Red, can be set as required by control system |
I1...I3 | State of the corresponding input |
1.Y1 | State of the input |
Housing material | Polyamide PA 6.6 |
Ambient temperature | 0 ... 55 °C |
Degree of protection | IP20 |
Mounting method | Mounting rail 35mm according to DIN EN 60715 TH35 |
Reaction time | |
Safety circuit off | max.50 ms |
Connection | Connection terminals |
E1 terminal I1, E2 terminal I2, E3 terminal I3 | |
Number of inputs | 3 |
Output contact set 1: 1.13, 1.14, output contact set 2: 1.23, 1.24 | |
Number of safety contacts | 1 |
Terminal 1.Y1, I+ | |
Number of inputs | 1 |
ASi voltage | |
DC | 30 V |
ASi operating current | max.200 mA |
Current | 0,1 A Supply for sensors |
LED indicator | |
3 LEDs yellow (I1, I2, I3) state of input E1, E2 and E3 | |
1 x LED yellow (1. Y1) state EDM input 1.Y1 | |
LED green (Pwr) AS-i power supply | |
LED red (Fault) AS-i fault | |
LED yellow (Out) relay has switched and error message | |
LED red (Alarm) PLC is signaling alarm | |
Rated insulation voltage Ui | 6000 V |
Overvoltage category according to IEC EN 60664-1 | 3 |
Connecting cable | 9W |
Max. contact load | |
DC -13 | 3A 24V |
AC -15 | 3A 250V |
Terminal 1.Y1, I+ | |
Type of input | Feedback loop (EDM) |
Current via feedback loop | |
at 24V DC | 10 mA From AS-i (EDM) |
Output contact set 1: 1.13, 1.14, output contact set 2: 1.23, 1.24 | |
Type of output | |
2 NO contacts per safety output | Relay contacts, floating, positively driven (redundant) |
E1 terminal I1, E2 terminal I2, E3 terminal I3 | |
Type of input | standard |
Data interface | Address programming socket AS-i (ADDR) |
Control/indicator | |
Ausfuhrung | |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement |
In compliance with | EN 61 508, EN 62 061, EN ISO 13 849-1 |
Performance Level | PL e |
Category | 4 |
PFHD | 3.3 x 10-9 |
SIL CL | 3 |
Mission time | 20 y |