We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
EGT2-2000
Part number
001864
Description
Präzisions-Einloch-Endschalter EGT2-2000
Stock availability:
On request
If you are pursuing Euchner EGT2-2000 001864, contact FAMAGA, the world's major supplier of industrial equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of outcomes and personalseparate attention to each customer. We understand everyone, who cooperated with us - therefore, our regular consumers receive the most beneficial purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 4 thousand such customers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Senegal, Colombia, Bosnia and Herzegovina, East Timor, Tanzania, Yemen, Moldova, Swaziland, Morocco, Botswana, Pakistan, Indonesia, Tunisia, South Korea, Seychelles, Cape Verde, Netherlands, Egypt, Bangladesh, Hungary, Afghanistan, Eswatini, Dominica, Mauritania, Kenya, Algeria, Poland, The Gambia, Vietnam, Tajikistan, Estonia, Croatia, Djibouti, Latvia, Serbia, Philippines. A advanced logistics system and a partnership network guide us to dispatch our units anywhere in the planet on-time without disreputing product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Design | Thread M18 x 1.5 |
Housing material | |
Sleeve | Brass, nickel-plated |
Threaded section | Brass, nickel-plated |
Ambient temperature | -5 ... 60 °C |
Degree of protection | IP67 |
Mechanical life | 1 x 106 |
Contact material | Fine silver gold-plated |
Switching principle | Snap-action switching contact |
Repeat accuracy (absolute) | ±0,01 mm |
Installation orientation | Any |
Number of NC contacts | 1 |
Number of NO contacts | 1 |
Connection | PUR cable |
Cable length | 2 m |
Approach speed | 0,01 ... 10 m/min |
Actuating element | Ball plunger |
Actuating force | |
Approx. | 24 N |
Utilization category according to EN 60947-5-1 | |
AC-15 | 2A 230V |
DC-13 | 1A 24V |
Short circuit protection according to IEC 60269-1 | 2A gG |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 2,5 kV |
Switching voltage | |
min. | 12 V |
Switching current | |
Min. at 24V | 10 mA |
Connection cross-section | 0,75 mm? |