We are not the manufacturer, authorised distributor or authorised representative of the Baumer brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Baumer
Country
Germany
Name
HOG 86
Type
Инкрементальный энкодер
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Baumer HOG 86 , connect FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and special attention to each user. We understand everyone, who conspired with us - therefore, our regular buyers accept the most convenient purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Slovenia, Greece, Bahamas, Cyprus, Oman, Albania, Nicaragua, Tanzania, South Korea, Syria, Bolivia, Netherlands, Myanmar, Honduras, Grenada, Chile, Cameroon, Romania, Kiribati, Croatia, Namibia, Angola, Turkmenistan, Philippines, Zambia, Indonesia, Japan, The Gambia, Fiji, Mexico, Mauritius, Seychelles, Iran, Algeria, Latvia, Georgia, United States, Guatemala, Jordan, Tajikistan, Andorra, Botswana, Ghana, Kuwait, Hungary, Suriname, Brazil, Serbia, Switzerland. A well-elaborated logistics series and a partnership network let us to send our units anywhere in the world promptly without discrediting product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Технические данные — электрические параметры<\th> <\tr> | |
|---|---|
| Voltage supply<\td> | 9…30 VDC 5 VDC ±5 %<\td> <\tr> |
| Consumption w\o load<\td> | 100 mA<\td> <\tr> |
| Pulses per revolution<\td> | 500…5000<\td> <\tr> |
| Phase shift<\td> | 90° ±20°<\td> <\tr> |
| Scan ratio<\td> | 45…55 % (40…60 % >3072 pulses per revolution)<\td> <\tr> |
| Reference signal<\td> | Zero pulse, width 90°<\td> <\tr> |
| Sensing method<\td> | Optical<\td> <\tr> |
| Output frequency<\td> | 120 kHz 300 kHz (on request)<\td> <\tr> |
| Output signals<\td> | K1, K2, K0 + inverted Error output (only EMS)<\td> <\tr> |
| Output stages<\td> | HTL-P (power linedriver) TTL\RS422<\td> <\tr> |
| Shaft insulation<\td> | 2.8 kV<\td> <\tr> |
| Transmission length<\td> | 350 m at 100 kHz (HTL-P) 550 m at 100 kHz (TTL)<\td> <\tr> |
| Interference immunity<\td> | EN 61000-6-2<\td> <\tr> |
| Emitted interference<\td> | EN 61000-6-3<\td> <\tr> |
| Approvals<\td> | CE UL\CSA approval \ E256710<\td> <\tr> |
| Технические данные — механические параметры<\th> <\tr> | |
| Size (flange)<\td> | 99 mm<\td> <\tr> |
| Shaft type<\td> | 12…16 mm (blind hollow shaft) 17 mm (cone shaft 1:10)<\td> <\tr> |
| Shaft loading<\td> | 350 N axial 450 N radial<\td> <\tr> |
| Motor shaft tolerance<\td> | 0.2 mm radial<\td> <\tr> |
| Protection DIN EN 60529<\td> | IP 66<\td> <\tr> |
| Operating speed<\td> | 10000 rpm (mechanical)<\td> <\tr> |
| Operating torque<\td> | 6 Ncm<\td> <\tr> |
| Rotor moment of inertia<\td> | 160 gcm <\td> <\tr> |
| Materials<\td> | Housing: aluminium, coated Shaft: stainless steel<\td> <\tr> |
| Operating temperature<\td> | -40…+100 °C -40…+90 °C (fixed cable) -25…+100 °C (>3072 pulses per revolution)<\td> <\tr> |
| Resistance<\td> | IEC 60068-2-6 Vibration 15 g, 10-2000 Hz IEC 60068-2-27 Shock 250 g, 6 ms<\td> <\tr> |
| Corrosion protection<\td> | IEC 60068-2-52 Salt mist Complies to ISO 12944-5:1998 Protective paint systems (C4)<\td> <\tr> |
| Explosion protection<\td> | II 3 G Ex nA IIC T4 Gc (gas) II 3 D Ex tc IIIC T135°C Dc (dust)<\td> <\tr> |
| Connection<\td> | Terminal box Flange connector M23, 12-pin Cable 1 m<\td> <\tr> |
| Weight approx.<\td> | 1.3 kg<\td> <\tr> <\tbody> <\table>
Invite to the tender
Our Manager will contact you soon.
The request has been sent
The request has been sent
The message hasn't been sent
The message hasn't been sent
Send a requestWe will contact with you and answer to all your questions
Thank you for your request!
While we are processing your request you can find other required goods. Indeed, there are more than 10 000 brands in our catalogue
By ordering several items from us at once, you will significantly save on delivery!
Brands catalogue
Search
Something went wrong.
Something seems to have gone wrong. Try again later.
|
