We are not the manufacturer, authorised distributor or authorised representative of the Baumer brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Baumer
Country
Germany
Name
EIL580-TT12.5FN.02048.A
Type
Инкрементальный энкодер
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Baumer EIL580-TT12.5FN.02048.A , contact FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each user. We appreciate everyone, who conspired with us - therefore, our regular buyers accept the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Cape Verde, Sierra Leone, Madagascar, Costa Rica, Cambodia, Guatemala, Senegal, Guyana, Grenada, Kuwait, Kiribati, Luxembourg, Zambia, Bolivia, Netherlands, Libya, Finland, New Zealand, Mexico, Singapore, South Korea, Brazil, Comoros, Algeria, Botswana, Poland, Croatia, Laos, United Arab Emirates, Turkmenistan, Mozambique, Ecuador, Angola, Rwanda, Egypt, Ghana, Russia, Djibouti, Peru, Qatar, Pakistan, Philippines, East Timor, Swaziland. A well-elaborated logistics series and a partnership network allow us to send our goods anywhere in the world as soon as possible without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Технические данные — электрические параметры<\th> <\tr> | |
|---|---|
| Voltage supply<\td> | 5 VDC ±5 % 8…30 VDC 4.75…30 VDC<\td> <\tr> |
| Reverse polarity protection<\td> | Yes<\td> <\tr> |
| Short-circuit proof<\td> | Yes (HTL) Yes (TTL, max. 1 s and 1 signal)<\td> <\tr> |
| Consumption w\o load<\td> | 70 mA<\td> <\tr> |
| Pulses per revolution<\td> | 100…5000<\td> <\tr> |
| Phase shift<\td> | 90° ±10°<\td> <\tr> |
| Scan ratio<\td> | 40…60 %<\td> <\tr> |
| Reference signal<\td> | Zero pulse, width 90° ±10 %<\td> <\tr> |
| Sensing method<\td> | Optical<\td> <\tr> |
| Output frequency<\td> | 300 kHz (TTL) 160 kHz (HTL)<\td> <\tr> |
| Output signals<\td> | A+, B+, R+, A-, B-, R-<\td> <\tr> |
| Output stages<\td> | TTL\RS422 HTL\push-pull<\td> <\tr> |
| Interference immunity<\td> | DIN EN 61000-6-2<\td> <\tr> |
| Emitted interference<\td> | DIN EN 61000-6-3<\td> <\tr> |
| Approval<\td> | UL 508 \ CSA 22.2<\td> <\tr> |
| Технические данные — механические параметры<\th> <\tr> | |
| Size (flange)<\td> | 58 mm<\td> <\tr> |
| Shaft type<\td> | 8…15 mm (through hollow shaft)<\td> <\tr> |
| Motor shaft tolerance<\td> | 0.2 mm axial 0.03 mm radial<\td> <\tr> |
| Protection DIN EN 60529<\td> | IP 65 (without shaft seal) IP 67 (with shaft seal)<\td> <\tr> |
| Operating speed<\td> | 3000 rpm (+20 °C, IP 67) 6000 rpm (+20 °C, IP 65)<\td> <\tr> |
| Starting torque<\td> | 0.02 Nm (+20 °C, IP 65) 0.025 Nm (+20 °C, IP 67)<\td> <\tr> |
| Materials<\td> | Housing: aluminium die-cast Flange: aluminium<\td> <\tr> |
| Operating temperature<\td> | -40…+85 °C<\td> <\tr> |
| Relative humidity<\td> | 90 % non-condensing<\td> <\tr> |
| Resistance<\td> | DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 250 g, 6 ms<\td> <\tr> |
| Connection<\td> | Flange connector M12, 8-pin Flange connector M23, 12-pin Cable<\td> <\tr> |
| Weight approx.<\td> | 300 g<\td> <\tr> <\tbody> <\table>
Invite to the tender
Our Manager will contact you soon.
The request has been sent
The request has been sent
The message hasn't been sent
The message hasn't been sent
Send a requestWe will contact with you and answer to all your questions
Thank you for your request!
While we are processing your request you can find other required goods. Indeed, there are more than 10 000 brands in our catalogue
By ordering several items from us at once, you will significantly save on delivery!
Brands catalogue
Search
Something went wrong.
Something seems to have gone wrong. Try again later.
|
