We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5728400620
Description
Actuating control | single solenoid |
Return type | With air spring return |
Switching principle | 4/2 |
Version | Diaphragm poppet valve |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803, form C |
Protection class | IP65 |
Port size | EN 175301-803, form C |
Type | Plug |
Nominal flow Qn | 200 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6x1 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5728400620, contact FAMAGA, the world's key supplier of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are portrayed in the quality of products and private attention to each client. We praise everyone, who liased with us - so, our regular buyers bring in the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Suriname, Bhutan, Djibouti, Indonesia, Canada, Qatar, Lebanon, Mongolia, Hungary, Zambia, United Arab Emirates, Bosnia and Herzegovina, Panama, Burma, Kenya, Ukraine, Grenada, Uruguay, Japan, Eswatini, Norway, Costa Rica, Belize, East Timor, Jordan, Slovakia, Ecuador, Angola, Czech Republic, Mexico, Libya, Chile, Sudan, Austria, Central African Republic, Lithuania, Brunei, Argentina, Australia, Moldova, Mali, Comoros, Andorra, Morocco. A well-shaped logistics chains and a partnership network allow us to dispatch our units anywhere in the globe as soon as possible without damaging product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is rising every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To ask a question or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 1,5 ... 10 bar |
Note | The maximum operating pressure depends on the ambient temperature. The following values are applicable -15 °C ... 50 °C = Operating pressure 1.5 bar ... 8 bar possible-15 °C ... 40 °C = Operating pressure 1.5 bar ... 10 bar possible. |
Control pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 200 l/min |
Connector standard | EN 175301-803, form C |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 12 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Versions with voltage of less than 50 V DC do not have a protective ground. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber |