We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412000403
Description
Adjustable angle of rotation max. | 180 ° |
Adjustable angle of rotation min. | 0 ° |
Frame size | RCM-12 |
Version | double piston with rack |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | M5 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412000403, catch up with FAMAGA, the world's prime producer of manufacturing equipment. Our company has progressed for more than ten years - these are years of experience, which are illustrated in the quality of outcomes and particular attention to each consumer. We admire everyone, who conspired with us - therefore, our regular consumers procure the most desirable purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4000 such consumers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Tonga, Slovakia, Rwanda, Denmark, Guinea, Grenada, Malaysia, Laos, Bolivia, Myanmar, Tanzania, Macedonia, Gambia, Jamaica, Brazil, United States, Belize, India, Mexico, Bulgaria, Luxembourg, Finland, Yemen, Eswatini, Norway, Namibia, Mauritania, Tunisia, North Korea, Paraguay, Azerbaijan, Jordan, Kazakhstan, Ghana, Cameroon, Sudan, The Gambia, Antigua and Barbuda, Nigeria, New Zealand, Kyrgyzstan. A well-elaborated logistics chains and a partnership network help us to ship our goods anywhere in the earth promptly without discrediting product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To get some advice or order, contact us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | 4 ... 8 bar |
Ambient temperature min./max. | 5 ... 60 °C |
Medium temperature min./max. | 5 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
air duct | with air duct |
Cushioning | elastic |
Theoretical torque at | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTICE:For positioning without overswing in the intermediate position, it is recommended to limit the mass moment of inertia to 40% of the maximum permissible value! |
Material |
---|
Housing | Aluminum, anodized |
Cap | Aluminum, black anodized |
Base | Aluminum, black anodized |
Seal | Acrylonitrile butadiene rubber |
Axis | Steel, hardened |
Rotary flange | Steel, hardened |