We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301501
Description
Parts | Standard oil-mist lubricator |
Type of filling | Manual oil filling |
Protective guard | with protective guard |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 6000 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0821301501, reach FAMAGA, the world's dominant retailer of industrial equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and particular attention to each customer. We esteem everyone, who liased with us - therefore, our regular buyers bring in the most helpful purchase terms and discounts on the factory-made equipment market. Now, there are more than 4000 such buyers, and we constantly compose new agreements. More than 750 contracts are concluded per day, because FAMAGA works all over the earth Germany, United Kingdom, South Africa, Albania, Iran, Syria, Libya, Georgia, Slovakia, Romania, Estonia, Equatorial Guinea, Australia, Nigeria, Brunei, Tajikistan, Paraguay, The Bahamas, North Korea, Malaysia, Belize, Saudi Arabia, Botswana, Chile, Panama, Moldova, Cape Verde, Turkey, Indonesia, Eswatini, Ukraine, Monaco, Latvia, Macedonia, Sudan, India, Qatar, Greece, Jamaica, Tonga, Hungary, Iceland, Benin, Bangladesh, Comoros, Kazakhstan, Bosnia and Herzegovina, Israel, Finland. A well-developed logistics link and a partnership network help us to ship our products anywhere in the planet with no delay without compromising product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this number is rising every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or make a request, get in touch with us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |