We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480668900
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 21287 |
Stroke | 25 mm |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480668900, communicate with FAMAGA, the world's foremost distributor of streamlined equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of goods and particular attention to each orderer. We understand everyone, who conspired with us - thus, our regular purchasers receive the most desirable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Hungary, Dominican Republic, Uganda, Israel, Costa Rica, Liberia, Czech Republic, Colombia, Guinea, Liechtenstein, Belgium, Laos, Jordan, Brazil, Niger, Samoa, Central African Republic, Sierra Leone, Kyrgyzstan, Equatorial Guinea, Senegal, Cameroon, Georgia, Indonesia, Lithuania, Ecuador, Malaysia, Thailand, Dominica, Zambia, Uruguay, Ghana, Bosnia and Herzegovina, Paraguay, Montenegro, Andorra, Algeria, Jamaica, Slovakia, Cape Verde, Mongolia, Austria, Kiribati, Croatia. A well-developed logistics series and a partnership network guide us to ship our items anywhere in the globe immediately without disreputing product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . |
Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyurethane |