We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480166022
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480166022, make contact with FAMAGA, the world's leading distributor of streamlined equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of goods and individual attention to each client. We praise everyone, who conspired with us - thus, our regular consumers pick up the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 3500 such consumers, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Cameroon, Poland, Thailand, Madagascar, Equatorial Guinea, Kuwait, Armenia, Sierra Leone, Belarus, Chile, Cyprus, Afghanistan, Mauritania, Netherlands, Tunisia, United States, Pakistan, Chad, South Sudan, Libya, Sweden, Rwanda, Eritrea, Algeria, Albania, Angola, Norway, Croatia, East Timor, Antigua and Barbuda, Morocco, Nicaragua, Comoros, Yemen, China, Macedonia, Mexico, Namibia, Seychelles, Eswatini, Philippines, Serbia, Mauritius, Nepal, Tajikistan, Benin, United Arab Emirates, Andorra. A advanced logistics system and a partnership network allow us to dispatch our items anywhere in the planet as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are happy that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or book, contact us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |