We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226744150
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 15 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5226744150, call FAMAGA, the world's primary supplier of industrial equipment. Our company has functioned for more than ten years - these are ages of experience, which are described in the quality of goods and particular attention to each buyer. We esteem everyone, who cooperated with us - therefore, our regular customers obtain the most desirable purchase conditions and discounts on the factory-made equipment market. At present, there are more than 4 thousand such consumers, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Nepal, Côte d\'Ivoire, Haiti, Guinea, Dominican Republic, Slovenia, Gambia, Bahamas, Eritrea, Uganda, Pakistan, Uruguay, Oman, Australia, Fiji, Lithuania, Liberia, Malaysia, Chad, Estonia, Macedonia, Algeria, Egypt, Albania, Czech Republic, Luxembourg, South Korea, China, Brazil, Qatar, Djibouti, Suriname, Burundi, Switzerland, Kuwait, Madagascar, Sierra Leone, Burkina Faso, United States, Mexico, Cyprus, Sweden, Morocco. A well-shaped logistics chains and a partnership network cheer us to dispatch our units anywhere in the earth on-time without compromising product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is ascending every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |