We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822490304
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822490304, connect FAMAGA, the world's top supplier of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of merchandises and particular attention to each client. We understand everyone, who cooperated with us - thus, our regular purchasers obtain the most acceptable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 750 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, India, Dominica, Bahamas, Guinea-Bissau, Jamaica, Italy, Togo, United States, Singapore, Kyrgyzstan, China, Qatar, New Zealand, Equatorial Guinea, Djibouti, Turkey, Brazil, Romania, Eritrea, Rwanda, Comoros, Pakistan, Senegal, Nepal, Egypt, Montenegro, Finland, Syria, Yemen, El Salvador, Afghanistan, Mexico, Costa Rica, Guatemala, Luxembourg, Zambia. A well-built logistics network and a partnership network let us to ship our products anywhere in the world as soon as possible without disreputing product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as stay in control.
To request or place an order, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |