We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480668761
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 21287 |
Stroke | 150 mm |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480668761, call FAMAGA, the world's key vendor of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and particular attention to each user. We value everyone, who worked with us - hence, our regular clients obtain the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Armenia, Vietnam, Peru, Dominican Republic, Norway, Kenya, Bahamas, The Gambia, Belgium, Cuba, Belarus, Papua New Guinea, Guinea, Guatemala, Paraguay, Afghanistan, Namibia, Eritrea, Fiji, Yemen, Gambia, Dominica, Qatar, Ghana, Brunei, Macedonia, South Korea, Mozambique, Jamaica, Lithuania, United Arab Emirates, Finland, South Sudan, Cape Verde, Tajikistan, El Salvador, Serbia, Zimbabwe, Syria, Croatia, Egypt. A advanced logistics system and a partnership network allow us to conduct our goods anywhere in the globe immediately without undermining product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyurethane |