We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001530
Description
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422001530, communicate with FAMAGA, the world's central vendor of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each client. We esteem everyone, who conspired with us - thus, our regular buyers accept the most convenient purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such clients, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, China, Oman, Greece, East Timor, Romania, Guinea, Malaysia, Libya, Malawi, Croatia, Liechtenstein, Uganda, Latvia, Azerbaijan, Namibia, Russia, Angola, Moldova, Gambia, El Salvador, Indonesia, Mauritius, Morocco, Egypt, Yemen, Togo, Serbia, Bangladesh, Suriname, Eswatini, Jamaica, South Korea, Seychelles, Cyprus, Haiti, Botswana, Cameroon. A well-shaped logistics series and a partnership network allow us to send our goods anywhere in the world with no delay without disreputing product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or make a request, phone us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |