We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472406273
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 100 mm |
Piston rod thread | M27x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 150 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7472406273, reach FAMAGA, the world's central producer of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are represented in the quality of merchandises and personalseparate attention to each purchaser. We cherish everyone, who worked with us - thus, our regular consumers obtain the most helpful purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4500 such customers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Netherlands, Sweden, Pakistan, Greece, Colombia, Lebanon, Swaziland, Peru, Romania, Iceland, Suriname, Oman, Zambia, Rwanda, Albania, Togo, Sudan, The Bahamas, Bangladesh, Switzerland, China, Tanzania, Angola, Mauritania, Belarus, Japan, Qatar, Panama, Guyana, South Sudan, Bolivia, Sierra Leone, Jamaica, Kazakhstan, Malta, Malaysia, Latvia, Mozambique, Dominica, Benin, Serbia, Niger, Costa Rica, Libya. A well-developed logistics connection and a partnership network assist us to deliver our units anywhere in the world on-time without compromising product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been provided, and this bulk is increasing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To consult or book, contact us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |