We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822063107
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Stroke | 25 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822063107, communicate with FAMAGA, the world's primary company of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of products and private attention to each orderer. We praise everyone, who liased with us - thus, our regular clients procure the most attractive purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such clients, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Djibouti, Macedonia, Latvia, Papua New Guinea, Grenada, Dominica, Cyprus, South Korea, Togo, Central African Republic, Canada, Algeria, Estonia, Yemen, Peru, Thailand, Iceland, Afghanistan, Israel, Angola, Switzerland, Zambia, Serbia, South Sudan, Swaziland, Guyana, Croatia, Azerbaijan, Samoa, Armenia, Nicaragua, Jamaica, New Zealand, Tajikistan, Slovakia, Ireland, Suriname, Belarus, Czech Republic, The Gambia, Turkey, Nepal, Denmark, Brunei, Kyrgyzstan. A well-shaped logistics series and a partnership network cheer us to dispatch our products anywhere in the globe as soon as possible without damaging product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as stay in control.
To inquire or make a request, phone us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |