We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013713
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412013713, communicate with FAMAGA, the world's top supplier of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are outlined in the quality of products and individual attention to each buyer. We cherish everyone, who collaborated with us - hence, our regular customers get the most desirable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly arrange new agreements. More than 750 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Sri Lanka, Estonia, Spain, Serbia, Myanmar, Portugal, Brunei, Malta, Mozambique, Montenegro, Samoa, Honduras, Comoros, Netherlands, Saudi Arabia, Poland, Uganda, Latvia, Antigua and Barbuda, Suriname, Guyana, Morocco, Jamaica, Liechtenstein, Botswana, Costa Rica, Equatorial Guinea, Albania, Peru, Sweden, Swaziland, Tajikistan, Vietnam, Syria, Haiti, Finland, Switzerland, Lithuania, Turkey, Mauritius, Zambia, Malaysia, Croatia. A well-shaped logistics series and a partnership network allow us to deliver our products anywhere in the planet immediately without compromising product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To inquire or order, call us by phone or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |