We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001470
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 21287 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001470, reach FAMAGA, the world's prime provider of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each user. We esteem everyone, who worked with us - thus, our regular purchasers obtain the most convenient purchase terms and discounts on the industrial equipment market. Now, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Cyprus, Nigeria, France, Rwanda, Mauritania, Papua New Guinea, Dominican Republic, Czech Republic, Nicaragua, Netherlands, The Bahamas, Andorra, Madagascar, Equatorial Guinea, North Korea, Cameroon, Bulgaria, Finland, Kuwait, Indonesia, Vietnam, Albania, Jamaica, Botswana, Morocco, Lithuania, Philippines, Pakistan, Moldova, Fiji, Iraq, Croatia, Estonia, Sudan, Dominica, Tanzania, Sweden, Uruguay, Panama, Senegal, Seychelles, Yemen. A well-developed logistics bond and a partnership network let us to ship our units anywhere in the world with no delay without damaging product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of industrial equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To get some advice or make a request, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Scraper | Polyurethane |