We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300353
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 6900 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0821300353, communicate with FAMAGA, the world's principle distributor of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of products and individual attention to each user. We cherish everyone, who worked with us - thus, our regular consumers accept the most attractive purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 3500 such consumers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Afghanistan, Burkina Faso, Kuwait, Myanmar, Bahamas, Brunei, Georgia, Jordan, Equatorial Guinea, Mongolia, Morocco, Mozambique, Cyprus, Comoros, Sudan, Yemen, Tanzania, Macedonia, Oman, Azerbaijan, Fiji, Syria, Seychelles, Monaco, Zimbabwe, Finland, Namibia, Russia, Qatar, Turkmenistan, New Zealand, Philippines, Malta, Belarus, Lithuania, Armenia, Luxembourg, Madagascar, Botswana, Brazil, Sweden, Slovakia, United States, Mexico. A well-elaborated logistics bond and a partnership network assist us to conduct our elements anywhere in the earth with no delay without discrediting product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are glad that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as stay in control.
To get some advice or make a request, phone us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 6900 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 50 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |