We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Aventics (brand of Emerson) R480176882, connect FAMAGA, the world's key producer of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and particular attention to each consumer. We understand everyone, who worked with us - thus, our regular consumers get the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Côte d\'Ivoire, Liberia, Chad, Haiti, India, Slovakia, Turkmenistan, Albania, Liechtenstein, East Timor, Mongolia, Gambia, Grenada, Kyrgyzstan, Sierra Leone, Australia, Kenya, Ireland, Central African Republic, Equatorial Guinea, Thailand, Vietnam, Uganda, Uzbekistan, Ghana, Kazakhstan, Bulgaria, Nicaragua, Senegal, Tajikistan, Libya, Turkey, Armenia, China, Austria, Botswana, Rwanda, Croatia, Iraq, Denmark, Paraguay, Argentina, Chile, Dominica. A advanced logistics link and a partnership network allow us to conduct our goods anywhere in the globe as soon as possible without disreputing product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are pleased that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To get some advice or book, contact us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |