We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820060898
Description
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 4-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 800 l/min |
Compressed air connection output | G 1/8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0820060898, contact FAMAGA, the world's chief distributor of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of items and individual attention to each consumer. We respect everyone, who conspired with us - therefore, our regular customers accept the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such clients, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Kyrgyzstan, Iceland, Papua New Guinea, Estonia, Azerbaijan, Singapore, Netherlands, Central African Republic, Slovenia, Croatia, Tunisia, Antigua and Barbuda, Lithuania, Belarus, Ukraine, Seychelles, Chile, South Sudan, Nepal, Gambia, Nicaragua, Suriname, Malta, The Bahamas, Georgia, Mongolia, Jamaica, Djibouti, Costa Rica, Peru, Tanzania, Samoa, Tajikistan, East Timor, Panama, Indonesia, Poland, Brunei, United Arab Emirates. A advanced logistics bond and a partnership network allow us to conduct our goods anywhere in the planet as soon as possible without disreputing product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, contact us or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Plate principle |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Nominal flow Qn | 800 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |