We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020710
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412020710, communicate with FAMAGA, the world's chief supplier of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each customer. We appreciate everyone, who cooperated with us - hence, our regular consumers receive the most desirable purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Angola, Tanzania, The Gambia, Namibia, Zambia, Bangladesh, Iraq, Mali, Morocco, New Zealand, Benin, Grenada, Australia, Qatar, Georgia, Argentina, Algeria, Hungary, Uganda, Bulgaria, Tonga, Switzerland, Chad, China, Austria, Libya, Cameroon, Mozambique, Rwanda, El Salvador, Malta, Luxembourg, Ecuador, Lithuania, Eswatini, Armenia, Yemen, Chile, Sierra Leone, Czech Republic. A well-developed logistics system and a partnership network cheer us to dispatch our goods anywhere in the globe immediately without compromising product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that customers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To ask a question or make a request, phone us or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |